PVC Blister Films for Pharma & Healthcare Applications
Created with the Pharmaceutical and Healthcare industries in mind, these rigid films are plasticizer free, that provide superior clarity with good chemical resistance, excellent thermo formability and good dimensional stability.
How Day Life Makes a Difference :-
Excellent thickness control
Excellent formability
Excellent clarity & transparency
Higher processing yields
Superior sealing
Good impact strength
Active drug master file with USFDA (DMF No. 17354, Type III)
Complying to EEC/USP guidelines (current version)
Best barrier properties against moisture, oxygen and UV Rays
Provides maximum efficiency and increases shelf life
Applications :-
Tablets
IV Sets
Syringe Kits
Injection Trays
Fenoplast Films are Manufactured in a Controlled Environment Following Good Manufacturing Practices.
Technical Data :-
SL. NO.
CHARACTERISTICS
UNIT
METHOD
SPECIFICATION & REMARKS
1
Thickness Tolerance
MICRONS
DIN 53370
± 10% for <200; ± 8% for 201 to 400; ± 4% for 401 to 700
2
GSM Tolerance
GM/M²
DIN 53352
± 10% for <200; ± 8% for 201 to 400; ± 4% for 401 to 700
3
Gloss (@20°C)
%
ASTM D 2457
Min. 85 for Transparent Film
Min. 65 for Opaque Film
4
Impact Strength
GM
ASTM D 1709
400 Min. for > 250µ
250 Min. for < 220µ
5
Dimensional Stability
(@ 1400°C/10 min)
% MD
DIN 53377
-3.0 to -13.0(110 to 170µ), -3.0 to -10.0(171 to 200µ)
-3.0 to -8.0(201 to 250µ), -3.0 to -7.0(>250µ)
%TD
DIN 53377
0.5 to 6.0(110 to 170µ), 0.5 to 5.0(171 to 200µ)
0.5 to 4.0(201 to 250µ), 0.5 to 2.5(>250µ)
6
Tensile Strength at Peak
KG/CM²
ASTM D 882
_>500
7
Elongation at Peak Load (Jaw Separation Speed @20mm/min)
%
ASTM D 882
_>4
8
Density
GM/CM³
ASTM -D 792
Transparent Film -1.36 ± 0.02
Opaque Film -1.39 ± 0.02
9
Vicat Softening Point
°C
ASTM -D 1525
74 ± 2
10
WVTR @ 38°C, 90% RH
GM/M²/24HR
ASTM F 1249
< 4.00(<_200µ); <3.75(>220µ)
11
OTR @ 23°C, 0% RH
CM³/M²/24HR
ASTM D 3985
< 12.00(<_200µ); <10.00(>220µ)
12
Toxicity
N/A
Current USP Method
Non - Toxic
13
Global Migration
PPM
2002/72/EC
< 10
14
RVCM Content
PPM
78/142/EEC
< 0.50
15
RoHS
PPM
94/62/EC
Complies
16
Other Defects
N/A
FPL/QA/STP-17
Free from Air Streaks, Dents, Hot Patches
These technical specifications and end-use recommendations are based on our observations and assessment.
Validating/optimizing the right grade may vary based on particular application, tooling and process conditions.